فارسی
English
اسلاید قبلی
اسلاید بعدی
انکوباتورهای آزمایشگاهیی سری AKSA
پایداری بالا ■
تکنولوژی ترموالکتریک ■
قابل برنامه ریزی ■
این محصول برای فرآیندهای آزمایشگاهی و تحقیقاتی طراحی و تولید شده است. مهمترین ویژگی آن پایداری دما است. همچنین محدوده دمایی آن باعث شده است AKSA یکی از محبوب ترین محصولات آزمایشگاه های کنترل کیفیت، صنایع دارویی، صنایع شیمیایی و مراکز تحقیقاتی باشد. کاربران اصلی این محصول. مدیریت نرم افزار و قابلیت برنامه ریزی یکی دیگر از ویژگی های این محصول است که باعث استفاده گسترده آن می شود. قابلیت برنامه ریزی تا 16 سیکل، کالیبراسیون داخلی، نمودار پایداری و گزارش نتایج از مهمترین ویژگی های نرم افزاری این محصول می باشد.تمامی امکانات نرم افزاری این محصول توسط کامپیوتر داخلی قابل مدیریت بوده و کاربر می تواند با استفاده از USB .تمامی نتایج را استخراج کند.
AKSA-AP5 Thermoelectric (Range : 5 °C to 70 °C )
| MODEL | PARAMETER |
|---|---|
| AKSA-AP5 | |
| Temperature Range(°C ) | 5°C to 70°C (in ambient of 20°C minimum tempurature is 15°C below ambient) |
| COMMON Specifications | |
| Temperature Stability (°C) | ±0.1°C |
| Humity Stability | __ |
| Displaye resolution (°C) | 0.1°C |
| Internal Sensor | Pt100 cla AA 3 wire |
| Temp & Controller | PID |
| Integrated Programmer | up to 15 cycles |
| Accuracy (°C ) | 0.1°C |
| Display | Touch Screen LCD (32 bit) |
| Integrated Programmer | 1 * USB / 1 * LAN |
| Loggin iterval | 1 second to 30 min |
| Absolute Temperature Calibration | 6 point calibration |
| Ambient Conditions | 10°C to 30°C |
| Digital Interface | 1 * USB / 1 * LAN / 1 * SD CARD |
| Volume | up to 120 Lit |
| Circulation System | Air Fan |
| Power | 800 watts |
| Voltage | 220 Vac 50 Hz |
| Max Current | 4 A |
| Body material | Stainless steel 1mm |
| Insulation | Cabinet is foamed-in-place with EPA compliant high density urethane foam |
| IP code | ip-21 |
| Exteriror dimension (W*D*H) by 60 Lit | 900 w * 600 D * 650 H (mm) |
| Product wight (no load) | > 60 kg |
| Warranty | 1 year |
| Calibration Sertificate (optional) | Accorading to international standard's |
| WWW.LOCROM.COM | |
AKSA-A25 (Range : Amb to 70 °C )
| MODEL | PARAMETER |
|---|---|
| AKSA-A25 | |
| Temperature Range(°C ) | Amb to 70°C |
| COMMON Specifications | |
| Temperature Stability (°C) | ±0.1°C |
| Humity Stability | __ |
| Displaye resolution (°C) | 0.1°C |
| Internal Sensor | Pt100 cla AA 3 wire |
| Temp & Controller | PID |
| Integrated Programmer | up to 15 cycles |
| Accuracy (°C ) | 0.1°C |
| Display | Touch Screen LCD (32 bit) |
| Integrated Programmer | 1 * USB / 1 * LAN |
| Loggin iterval | 1 second to 30 min |
| Absolute Temperature Calibration | 6 point calibration |
| Ambient Conditions | 10°C to 30°C |
| Digital Interface | 1 * USB / 1 * LAN / 1 * SD CARD |
| Volume | up to 750 Lit |
| Circulation System | Air Fan |
| Power | 1000 watts in 60 Lit |
| Voltage | 220 Vac 50 Hz |
| Max Current | 6 A |
| Body material | Stainless steel 1mm |
| Insulation | Cabinet is foamed-in-place with EPA compliant high density urethane foam |
| IP code | ip-21 |
| Exteriror dimension (W*D*H) by 60 Lit | 900 w * 600 D * 650 H (mm) |
| Product wight (no load) | > 60 kg |
| Warranty | 1 year |
| Calibration Sertificate (optional) | Accorading to international standard's |
| WWW.LOCROM.COM | |
AKSA-A12 (Range : -12 °C to 60 °C )
| MODEL | PARAMETER |
|---|---|
| AKSA-A12 | |
| Temperature Range(°C ) | -12°C to 60°C |
| COMMON Specifications | |
| Temperature Stability (°C) | ±0.1°C |
| Humity Stability | __ |
| Displaye resolution (°C) | 0.1°C |
| Internal Sensor | Pt100 cla AA 3 wire |
| Temp & Controller | PID |
| Integrated Programmer | up to 15 cycles |
| Accuracy (°C ) | 0.1°C |
| Display | Touch Screen LCD (32 bit) |
| Integrated Programmer | 1 * USB / 1 * LAN |
| Loggin iterval | 1 second to 30 min |
| Absolute Temperature Calibration | 6 point calibration |
| Ambient Conditions | 10°C to 30°C |
| Digital Interface | 1 * USB / 1 * LAN / 1 * SD CARD |
| Volume | up to 750 Lit |
| Circulation System | Air Fan |
| Power | 1200 watts in 60 Lit |
| Voltage | 220 Vac 50 Hz |
| Max Current | 6 A |
| Body material | Stainless steel 1mm |
| Insulation | Cabinet is foamed-in-place with EPA compliant high density urethane foam |
| IP code | ip-21 |
| Exteriror dimension (W*D*H) by 60 Lit | 900 w * 600 D * 650 H (mm) |
| Product wight (no load) | > 60 kg |
| Warranty | 1 year |
| Calibration Sertificate (optional) | Accorading to international standard's |
| WWW.LOCROM.COM | |
AKSA-A250 (Range : 30 °C to 250 °C )
| MODEL | PARAMETER |
|---|---|
| AKSA-A250 | |
| Temperature Range(°C ) | 30°C to 250°C |
| COMMON Specifications | |
| Temperature Stability (°C) | ±0.1°C |
| Humity Stability | __ |
| Displaye resolution (°C) | 0.1°C |
| Internal Sensor | Pt100 cla AA 3 wire |
| Temp & Controller | PID |
| Integrated Programmer | up to 15 cycles |
| Accuracy (°C ) | 0.1°C |
| Display | Touch Screen LCD (32 bit) |
| Integrated Programmer | 1 * USB / 1 * LAN |
| Loggin iterval | 1 second to 30 min |
| Absolute Temperature Calibration | 6 point calibration |
| Ambient Conditions | 10°C to 30°C |
| Digital Interface | 1 * USB / 1 * LAN / 1 * SD CARD |
| Volume | up to 120 Lit |
| Circulation System | Air Fan |
| Power | 2500 watts |
| Voltage | 220 Vac 50 Hz |
| Max Current | 12 A |
| Body material | Stainless steel 1mm |
| Insulation | Cabinet is foamed-in-place with EPA compliant high density urethane foam |
| IP code | ip-21 |
| Exteriror dimension (W*D*H) by 60 Lit | 900 w * 600 D * 650 H (mm) |
| Product wight (no load) | > 60 kg |
| Warranty | 1 year |
| Calibration Sertificate (optional) | Accorading to international standard's |
| WWW.LOCROM.COM | |
AKSA-B25 (Range : Amb to 70 °C )
| MODEL | PARAMETER |
|---|---|
| AKSA-B25 | |
| Temperature Range(°C ) | Amb to 70°C |
| COMMON Specifications | |
| Temperature Stability (°C) | ±0.3°C |
| Exterior material | Oil sheet with electrostatic powder paint |
| Display resolution (°C) | 0.1°C |
| Internal Sensor | Pt100 cla AA 3 wire |
| Temp & Controller | PID |
| Integrated Programmer | up to 15 cycles |
| Accuracy (°C ) | 0.1°C |
| Display | Graphic LCD |
| Integrated Programmer | 1 * SD card |
| Loggin iterval | 1 second to 30 min |
| Absolute Temperature Calibration | 6 point calibration |
| Ambient Conditions | 10°C to 30°C |
| Digital Interface | 1 * USB / 1 * LAN / 1 * SD CARD |
| Volume | up to 260 Lit |
| Circulation System | Air Fan |
| Power | 1000 watts |
| Voltage | 220 Vac 50 Hz |
| Max Current | 6 A |
| Body material | Stainless steel 1mm |
| Insulation | Cabinet is foamed-in-place with EPA compliant high density urethane foam |
| IP code | ip-21 |
| Exteriror dimension (W*D*H) by 60 Lit | 900 w * 600 D * 650 H (mm) |
| Product wight (no load) | > 60 kg |
| Warranty | 1 year |
| Calibration Sertificate (optional) | Accorading to international standard's |
| WWW.LOCROM.COM | |
AKSA-B25 (Range : -12°C to 70 °C )
| MODEL | PARAMETER |
|---|---|
| AKSA-B12 | |
| Temperature Range(°C ) | -12°C to 70°C |
| COMMON Specifications | |
| Temperature Stability (°C) | ±0.3°C |
| Exterior material | Oil sheet with electrostatic powder paint |
| Display resolution (°C) | 0.1°C |
| Internal Sensor | Pt100 cla AA 3 wire |
| Temp & Controller | PID |
| Integrated Programmer | up to 15 cycles |
| Accuracy (°C ) | 0.1°C |
| Display | Graphic LCD |
| Integrated Programmer | 1 * SD card |
| Loggin iterval | 1 second to 30 min |
| Absolute Temperature Calibration | 6 point calibration |
| Ambient Conditions | 10°C to 30°C |
| Digital Interface | 1 * USB / 1 * LAN / 1 * SD CARD |
| Volume | up to 260 Lit |
| Circulation System | Air Fan |
| Power | 1500 watts |
| Voltage | 220 Vac 50 Hz |
| Max Current | 8 A |
| Inrterior material | Stainless steel (316)1mm |
| Insulation | Cabinet is foamed-in-place with EPA compliant high density urethane foam |
| IP code | ip-21 |
| Exteriror dimension (W*D*H) by 60 Lit | 900 w * 600 D * 650 H (mm) |
| Product wight (no load) | > 60 kg |
| Warranty | 1 year |
| Calibration Sertificate (optional) | Accorading to international standard's |
| WWW.LOCROM.COM | |
AKSA-B5 (Range : 5°C to 70 °C )
| MODEL | PARAMETER |
|---|---|
| AKSA-B5 | |
| Temperature Range(°C ) | 5°C to 70°C |
| COMMON Specifications | |
| Temperature Stability (°C) | ±0.3°C |
| Exterior material | Oil sheet with electrostatic powder paint |
| Display resolution (°C) | 0.1°C |
| Internal Sensor | Pt100 cla AA 3 wire |
| Temp & Controller | PID |
| Integrated Programmer | up to 15 cycles |
| Accuracy (°C ) | 0.1°C |
| Display | Graphic LCD |
| Integrated Programmer | 1 * SD card |
| Loggin iterval | 1 second to 30 min |
| Absolute Temperature Calibration | 6 point calibration |
| Ambient Conditions | 10°C to 30°C |
| Digital Interface | 1 * USB / 1 * LAN / 1 * SD CARD |
| Volume | up to 260 Lit |
| Circulation System | Air Fan |
| Power | 1200 watts |
| Voltage | 220 Vac 50 Hz |
| Max Current | 6 A |
| inrterior material | Stainless steel (316)1mm |
| Insulation | Cabinet is foamed-in-place with EPA compliant high density urethane foam |
| IP code | ip-21 |
| Exteriror dimension (W*D*H) by 60 Lit | 900 w * 600 D * 650 H (mm) |
| Product wight (no load) | > 60 kg |
| Warranty | 1 year |
| Calibration Sertificate (optional) | Accorading to international standard's |
| WWW.LOCROM.COM | |
AKSA-B250 (Range : 30°C to 250 °C )
| MODEL | PARAMETER |
|---|---|
| AKSA-B250 | |
| Temperature Range(°C ) | 30°C to 250°C |
| COMMON Specifications | |
| Temperature Stability (°C) | ±0.3°C |
| Exterior material | Oil sheet with electrostatic powder paint |
| Display resolution (°C) | 0.1°C |
| Internal Sensor | Pt100 cla AA 3 wire |
| Temp & Controller | PID |
| Integrated Programmer | up to 15 cycles |
| Accuracy (°C ) | 0.1°C |
| Display | Graphic LCD |
| Integrated Programmer | 1 * SD card |
| Loggin iterval | 1 second to 30 min |
| Absolute Temperature Calibration | 6 point calibration |
| Ambient Conditions | 10°C to 30°C |
| Digital Interface | 1 * USB / 1 * LAN / 1 * SD CARD |
| Volume | up to 260 Lit |
| Circulation System | Air Fan |
| Power | 2500 watts |
| Voltage | 220 Vac 50 Hz |
| Max Current | 14 A |
| inrterior material | Stainless steel (316)1mm |
| Insulation | Cabinet is foamed-in-place with EPA compliant high density urethane foam |
| IP code | ip-21 |
| Exteriror dimension (W*D*H) by 60 Lit | 900 w * 600 D * 650 H (mm) |
| Product wight (no load) | > 60 kg |
| Warranty | 1 year |
| Calibration Sertificate (optional) | Accorading to international standard's |
| WWW.LOCROM.COM | |
قابلیت ها
کاتالوگ محصول
قابلیت ها
| Metal Block Bath | Dry Block Calibrator provides fast and clean calibration of thermocouples, PRTs and other industrial sensors. Isotech blocks use a combination of multi zone and advanced materials technology to ensure constant temperature zones for high accuracy calibration. |
| Stirred Liquid Bath | Remove the metal block to convert to a stirred liquid bath. Liquid bath operation allows angled or awkward shaped probes to be calibrated. Accuracies are improved over Dry Blocks alone and with a suitable reference probe performance of 0.005°C is achievable. |
| Stirred Ice / Water Bath | The models that operate below 0°C can be used to provide a 0°C stirred ice / water bath. This provides a simple low cost way of checking that standards have not drifted in between calibrations. |
| Blackbody Source | Adding the blackbody target allows the testing of infrared thermometers. Low cost non-contact IR thermometers are increasingly being used in industry and the models is ideal to test and check these devices. The IR thermometer is focused on the target and compared to a reference probe in the block pocket. |
| Surface Sensor Calibrator | With the Surface Sensor Kit the test sensor is compared to a platinum resistance thermometer located just below the surface of the block. Again save the cost of buying additional equipment by adding accessories as required to expand the models for new calibration applications. |
| ITS-90 Fixed Point Apparatus | For the best possible performance with uncertainties to 0.0005°C (0.5mK) add an ITS-90 Fixed Point Cell. The most popular is the B8 Water Triple Point Cell, it is surprisingly affordable and simple to use – the triple point can be both created and maintained in the apparatus without the need for any other equipment or supplies |
کاتالوگ محصول
