نشان دهنده مدل AX 1
■ Including Dry Block & Liquid Bath
■ 65mm x 160mm Calibration Volume
■ Stability ≤ ±0.05°C.
These model will calibrate temperature probes from 30°C to 300°C with unrivalled Stability. These calibrator are easy to use and are available in three versions – the Basic ,the Site and the Advanced.The Basic has a digital display of set and nominal temperature, the Site additionally includes an in-built independent temperature indicator for a reference probe Advanced models additionally include software to manage logged data and configure the unit. The Aprond have large calibration volumes,65mm x160mm deep, which makes them ideal to use as portable liquid baths. Stirred liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid Baths can provide smaller calibration uncertainties than dryblocks and when used with suitable reference thermometers, accuracies of up to 0.05°C can be achieved.As a traditional Dry Block, several thermometers can be quickly calibrated.
PARAMETER | MODEL |
---|---|
NESHAN DAHADE | AX 1 |
Temperature Range* | 30°C to 300°C |
ADVANCED Range | |
Stability: Dry Block / Liquid Bath | ±0.01°C |
Display Resolution | 0.01°C over whole range |
Input Channel Accuracy: Thermocouple | ± 0.2°C |
CJC Accuracy | ±0.35°C |
Input Channel Accuracy: RTD | ±0.05°C ±0.005% RDG |
BASIC / SITE Range | |
Stability | ±0.05°C |
Display Resolution | 0.01°C from 30 to 99.99°C then 0.1°C |
COMMON Specifications | |
Stability | Blackbody ±0.3°C Surface Sensor ±0.5°C ITS-90 Cells ±0.0005°C |
Uniformity – Between Wells Dry Block Mode (Radial) | <0.05°C |
Uniformity – Lower 40mm (Axial) Dry Block Mode | <0.05°C |
Uniformity – Radial Bath Mode | <0.05°C |
Uniformity – Lower 40mm (Axial) as Liquid Bath | <0.05°C |
Heating Time | 30°C to 300°C: 40 mins |
Cooling Time | 300°C to 30°C: 90 mins |
Calibration Volume | 65 x 160 mm |
Standard Insert | 6 pockets, 3 x 6.5mm, 3 x 8.5mm |
Insert Types | Choice of three – See Accessories |
Ethernet – supporting software and USB Host | |
CJC Accuracy | 0.35°C |
Dimensions | 400H (including handle) x 225W x 320D mm |
Power | 800Watts |
Voltage | 115Vac or 230Vac 50/60Hz |
Weight | 10kg |
WWW.LOCROM.COM |
Metal Block Bath | Dry Block Calibrator provides fast and clean calibration of thermocouples, PRTs and other industrial sensors. Isotech blocks use a combination of multi zone and advanced materials technology to ensure constant temperature zones for high accuracy calibration. |
Blackbody Source | Adding the blackbody target allows the testing of infrared thermometers. Low cost non-contact IR thermometers are increasingly being used in industry and the models is ideal to test and check these devices. The IR thermometer is focused on the target and compared to a reference probe in the block pocket. |
Surface Sensor Calibrator | With the Surface Sensor Kit the test sensor is compared to a platinum resistance thermometer located just below the surface of the block. Again save the cost of buying additional equipment by adding accessories as required to expand the models for new calibration applications. |
سری 8000
کالیبراتور سری 8000
مدل FAKHRA
کالیبراتور سری 8000
مدل TENSER
کالیبراتور سری 8000
مدل APROND
کالیبراتور سری 8000
مدل ASTIAK
کالیبراتور سری 8000
مدل GALOS
کالیبراتور سری 8000
مدل JABAN
کالیبراتور سری 8000
مدل JUPIN
کالیبراتور سری 8000
مدل OTANA
کالیبراتور سری 8000
مدل NOTASH
کالیبراتور سری 8000
مدل HIRSA
کالیبراتور سری 8000
مدل + GALOPS
کالیبراتور سری 8000
مدل + TENSER