temperature calibrator
Model : notash - 8000 series
30°C to 300°C
- Including dry block & liquid bath
- High stability
- Portable
These model will calibrate temperature probes from 30°C to 300°C with unrivalled Stability. These calibrator are easy to use and are available in three versions – the Basic ,the Site and the Advanced.The Basic has a digital display of set and nominal temperature, the Site additionally includes an in-built independent temperature indicator for a reference probe Advanced models additionally include software to manage logged data and configure the unit. The Aprond have large calibration volumes,35mm x160mm deep, which makes them ideal to use as portable liquid baths. Stirred liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid Baths can provide smaller calibration uncertainties than dryblocks and when used with suitable reference thermometers, accuracies of up to 0.05°C can be achieved.As a traditional Dry Block, several thermometers can be quickly calibrated.
This calibrator has important features that can affect the calibration process.Portability is one of the most important features of NOTASH.In the comparison method, two parameters of stability and uniformity are effective in uncertainty calculations. High stability and uniformity throughout the aprond range has increased the quality of the calibration process.The Aprond calibration block features uniform heating with a custom wound heater over an extended length of the block. The block itself is made from copper which has a very high thermal conductivity; much superior to the aluminium bronze alloys used elsewhere. A propriety process is used to protect the copper from oxidising.This combination of materials and expert knowledge delivers superior performance.
- Range : 30°C to 300°C
- Display Resolution : 0.1°C & 0.01°C
- Stability : < ±0.05°C
- Cooling time : 300°C to 30°C 60min
- Heating rate : 30°C to 300°C 30min
- Calibration volume : 35mm * 160mm
- Standard insert : 6 pockets 2*6.5mm , 2*4.5mm , 1*8.0 , 1*9.0 all 80mm deep
- Power : 220 Vac(50 / 60 Hz) 300 Watts
- Metal block bath
- BlackBody source
- Traceable calibration Certificate
- Pc inter face
Register your order through the form, we will contact you soon
how to order notash ?
Register your order through the form, we will contact you soon
temperature calibrator
Model : notash-8000 series
30°C to 300°C
- Including dry block & liquid bath
- High stability
- Portable
These model will calibrate temperature probes from 30°C to 300°C with unrivalled Stability. These calibrator are easy to use and are available in three versions – the Basic ,the Site and the Advanced.The Basic has a digital display of set and nominal temperature, the Site additionally includes an in-built independent temperature indicator for a reference probe Advanced models additionally include software to manage logged data and configure the unit. The Aprond have large calibration volumes,35mm x160mm deep, which makes them ideal to use as portable liquid baths. Stirred liquid baths are suitable for temperature sensors of all types, sizes and shapes. Liquid Baths can provide smaller calibration uncertainties than dryblocks and when used with suitable reference thermometers, accuracies of up to 0.05°C can be achieved.As a traditional Dry Block, several thermometers can be quickly calibrated.
This calibrator has important features that can affect the calibration process.Portability is one of the most important features of NOTASH.In the comparison method, two parameters of stability and uniformity are effective in uncertainty calculations. High stability and uniformity throughout the aprond range has increased the quality of the calibration process.The Aprond calibration block features uniform heating with a custom wound heater over an extended length of the block. The block itself is made from copper which has a very high thermal conductivity; much superior to the aluminium bronze alloys used elsewhere. A propriety process is used to protect the copper from oxidising.This combination of materials and expert knowledge delivers superior performance.
- Range : 30°C to 300°C
- Display Resolution : 0.1°C & 0.01°C
- Stability : < ±0.05°C
- Cooling time : 300°C to 30°C 60min
- Heating rate : 30°C to 300°C 30min
- Calibration volume : 35mm * 160mm
- Standard insert : 6 pockets 2*6.5mm , 2*4.5mm , 1*8.0 , 1*9.0 all 80mm deep
- Power : 220 Vac(50 / 60 Hz) 300 Watts
- Metal block bath
- BlackBody source
- Traceable calibration Certificate
- Pc inter face